<h3>Job Description</h3>
Job DescriptionDescription:
What's in it for you?
<ul>
<li>Paid Vacation &amp; Holidays</li>
<li>Medical, Dental and Vision</li>
<li>Teladoc ($10 virtual medical visits)</li>
<li>HSA (Health Savings Account)</li>
<li>Profit Sharing</li>
<li>401K with company match</li>
<li>Short-Term &amp; Long-Term Disability</li>
<li>Life Insurance</li>
<li>Clean and safe work environment.</li>
</ul>
What you'll be doing:
Assist with and develop PSM (Process Safety Management), ARM (Ammonia Refrigeration Management), and Risk Management programs for ammonia refrigeration facilities. Travel is required.
 
Develop Process Safety Information (PSI):
<ul>
<li>Develop and update equipment schedules.</li>
<li>Develop and update ammonia inventory calculations.</li>
<li>Develop and update a mass and energy balance.</li>
<li>Develop, update, and evaluate machine room ventilation and ventilation calculations.</li>
<li>Develop, update, and evaluate relief vent piping and relief vent calculations.</li>
<li>Walkdown, verify, and update piping and instrument diagrams, P&amp;IDs.</li>
<li>Identify facility Codes and Standards.</li>
</ul>
As well as:
<ul>
<li>Develop Standard Operating Procedures, SOPs, for facilities to ensure PSM / RMP compliance and safe operation of equipment.</li>
<li>Develop &amp; conduct on-site training for operators utilizing their refrigeration system, P&amp;ID's, and operating procedures.</li>
<li>Develop Risk Management Plans, off-site consequence development, and assist in RPM preparation.</li>
<li>Conduct Mechanical Integrity Inspections and give a full comprehensive report of items that are out of compliance with, and or not satisfactory to, codes and industry standards.</li>
<li>Conduct Compliance Audits, prepare report of deficiencies to better assist facilities with PSM / RMP compliance and readiness.</li>
<li>Conduct Process Hazard Analysis, initial and revalidations, to ensure facilities are being built to or keeping up with codes and industry standards.</li>
<li>Assist with online PSMpro for facility PSM compliance documentation and preventative maintenance programs.</li>
</ul>
 
 
 
Requirements:
Qualifications:
<ul>
<li>Ammonia Refrigeration</li>
<li>Process Safety Management</li>
<li>Office 365 (Word, Excel, Outlook, etc.)</li>
<li>Attention to detail.</li>
<li>Critical thinking, analytical and problem-solving skills</li>
<li>Strong verbal and written communication skills</li>
<li>Computer literacy skills and comfort with various types of technology used in the industry.</li>
<li>Ability to work well as a team and interact with different groups of people.</li>
<li>Excellent written and verbal communication skills, including public speaking and presentation.</li>
<li>Ability to manage multiple projects and priorities at the same time while meeting deadlines.</li>
<li>Interpersonal skills, with the ability to establish effective professional relationships with employees and project managers.</li>
</ul>
Physical Requirements
<ul>
<li>Prolonged periods of sitting at a desk and working on a computer.</li>
<li>Must be able to lift 15 pounds at a time.</li>
<li>Must be able to climb ladders and stairs.</li>
<li>Frequently required to stand; walk; push; pull; reach with hands and arms; stoop; kneel; and crouch.</li>
</ul>

Process Safety Management Specialist (Industrial Ammonia Refrigeration)

<h3>Job Description</h3>
Job DescriptionDescription:
Join Our Team as a Mechanical Assembler – 1st and 2nd Shifts Available!
Decimal Engineering, a dynamic manufacturing facility in Coral Springs, Florida, is looking for talented individuals to join our team as Mechanical Assemblers. Specializing in Precision CNC Machining and Custom Sheet Metal Fabrication, Decimal Engineering supports a range of high-tech industries, including aerospace, medical, automotive, electronics, and marine. If you’re ready to work in a fast-paced, collaborative environment where safety and quality are paramount, this is your opportunity to grow and thrive!
Key Responsibilities
<ul>
<li>Interpret Blueprints and Diagrams: Follow blueprints, diagrams, engineering drawings, specifications, and other instructions to ensure accurate assembly of products.</li>
<li>Gather Materials and Tools: Prepare by organizing parts, tools, and materials for efficient assembly.</li>
<li>Assemble Components: Connect and fasten parts and subassemblies with precision, using hand tools such as screwdrivers and drills.</li>
<li>Measure and Verify: Ensure all components meet specifications by measuring and checking for a precise fit.</li>
<li>Perform Soldering (If Required): Join metal parts by applying solder to joints, following established techniques.</li>
<li>Maintain Inventory and Quality: Monitor product inventory, perform quality checks, and identify and document any defects.</li>
<li>Troubleshoot and Maintain Equipment: Keep equipment running smoothly by following guidelines and troubleshooting minor issues.</li>
<li>Promote Safety and Cleanliness: Follow all safety protocols to maintain a safe and organized workspace.</li>
</ul>
Requirements:What We’re Looking For
<ul>
<li>Education: High School Diploma or GED</li>
<li>Experience: Prior mechanical assembly experience is a plus, but not required.</li>
<li>Skills: Basic reading comprehension, strong attention to detail, computer navigation, and communication skills.</li>
<li>Physical Ability: Able to lift up to 20 pounds and perform repetitive tasks with manual dexterity.</li>
<li>Attention to Detail: Ability to perform tasks accurately and maintain focus.</li>
</ul>
Why Join Decimal Engineering?
<ul>
<li>Fast-Paced Growth Environment: Be part of an innovative team where you’ll never stop learning.</li>
<li>Equal Opportunity Employer: We celebrate diversity and provide equal opportunities to all.</li>
<li>Health and Safety First: Our facility is drug-free and adheres strictly to safety protocols.</li>
</ul>
If you're driven by quality and excited to be part of a team that crafts products for cutting-edge industries, apply now to become a Mechanical Assembler with Decimal Engineering!

Mechanical Assembler

<h3>Job Description</h3>
Job DescriptionDescription:Join Our Team – Production Tech / Assembly Tech 
Location: Tampa, FL Department: Trolling Motor Assembly ? Position Type: Full-Time, Non-Exempt
 
Power Your Career with Power-Pole!
Are you mechanically inclined, detail-oriented, and looking for a hands-on career in a fast-paced, team-driven environment? Join Power-Pole, a leader in high-performance marine technology, as a Production Tech / Assembly Tech and be part of something that moves—literally!
In this role, you’ll help build, test, and package some of the most advanced trolling motors and accessories in the industry. Whether you love working with your hands, solving mechanical challenges, or taking pride in craftsmanship and precision, this opportunity is perfect for you!
 What You'll Do:
? Assemble high-quality trolling motors – from sub-assemblies to main builds ? Test final products to ensure top-tier performance ? Build and test remotes &amp; foot buttons for seamless operation ? Use pneumatic tools and other industry-standard equipment ? Keep your workspace clean, safe, and organized ? Work independently and as part of a team to meet production goals
 What We’re Looking For:
Self-Starter – You take initiative and make the most of your time Team Player – You give and receive feedback and contribute to a positive work environment Mechanically Inclined – You’re comfortable using hand tools and working with moving parts Problem-Solver – You can follow instructions but also raise concerns and suggest solutions Detail-Oriented – You take pride in accuracy and quality workmanship Adaptable &amp; Dependable – You show up on time, stay organized, and handle challenges with a great attitude
 Why Join Power-Pole?
? Career Growth – Work with industry-leading technology and expand your skills ? Team-Oriented Culture – Join a workplace that values collaboration and integrity ? Exciting Work Environment – Be part of the innovation behind cutting-edge marine products
 Ready to Build Something Great? Apply Today!
At Power-Pole, we’re more than just a workplace—we’re a team that values craftsmanship, quality, and innovation. If you’re looking for an exciting, hands-on role with opportunities to grow, we’d love to meet you!
 
Apply now and start your journey with Power-Pole!
Requirements:Work Schedule &amp; Environment:
Monday – Friday, 7:00 AM – 4:00 PM (One-hour lunch break) 
Work Setting: Warehouse/production environment with moderate to loud noise levels (forklifts, tools, etc.) 
Physical Requirements: ? Ability to stand, walk, and work with your hands for extended periods ? Lift and move up to 50 lbs ? Work near moving mechanical parts and exposure to industrial chemicals (safety measures in place) ? Reasonable accommodations available for individuals with disabilities

Production Tech/Assembly Tech

<h3>Job Description</h3>
Job DescriptionDescription:
WHO WE ARE:
Rev-Tech Manufacturing Solutions is a dynamic company with a diverse suite of manufacturing services. We strive to provide the most cost-effective solutions while delivering unmatched customer support.
 
We are a privately-owned company based in St. Petersburg, Florida, and we understand our customers have varying requirements. We support their unique needs to provide quality and versatility in the design and production of all manufactured products.
 
SUMMARY:
Performs all jobs relating to the Machine Shop Deburr/Finishing Department.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES: 
The metal finisher performs the following duties on a wide range of products and equipment. Work is performed under supervision by the department Lead.
<ul>
<li>Follow job schedule to perform bench operations to polish and remove burrs from a variety of machined and fabricated parts</li>
<li>Assist Floor Supervisor with the assignment of jobs to the Finishing Department’s personnel</li>
<li>Create tools to increase efficiency of part finishing</li>
<li>Reading and interpreting blue prints</li>
<li>Manual polishing and metal finishing</li>
<li>Powered device use for polishing and metal finishing including dremels, sanders, drills, grinders and other tools to complete parts</li>
<li>Use of special tools to remove burrs from critical areas</li>
<li>Inspect own work, correct or report detected discrepancies to supervisor</li>
<li>Maintain an organized and clean work environment.</li>
<li>Maintain necessary records. Move materials in the performance of duties or as directed. Detect and report improper operation, faulty equipment, defective materials and unusual conditions to supervisor </li>
<li>It is every employee’s responsibility to be aware of and adhere to the applicable Safety &amp; Health, Quality and Environmental Process of the Company.</li>
</ul>
Requirements:
QUALIFICATIONS:
<ul>
<li>High School diploma or GED required</li>
<li>Experience with Metal Finishing</li>
<li>Trade school, technical school, or military education preferred</li>
</ul>
SKILLS AND ABILITIES:
<ul>
<li>Ability to learn to perform the job assignments</li>
<li>Ability to read or learn to read Blue Prints</li>
<li>Ability to follow verbal and written instructions</li>
</ul>

Metal Finisher - 1st or 3rd Shift

<h3>Job Description</h3>
Job DescriptionDescription:
Market Leader in Aluminum Extrusion is seeking a saw/casting operator. Job Requirements include:
Available shifts: 1st shift/3rd shift 
Experience is not required. Experience in laborer focused roles such as landscaping, laborer, roofing, machine operator, etc. is great but not required.
 
Valid driver's license required.
Shift: 5:00am - 2:00pm Weekends are required.
Shift: 8:00pm - 5:00am Weekends are required.
 
Responsibilities include:
Saw/cast aluminum “logs”.
Saw Operator
Prior to cutting, inspects logs for surface and internal defects. Loads logs onto saw table as necessary. (May use forklift to lift logs.) Operates log feeder. Cuts logs into billets of prescribed length. Maintains proper flow of cutting lubricant. Determines proper cast identification for each billet; stamps each billet accordingly.
Inspects cut billets.
Weighs all scrap and records weight. Segregates, identifies, and disposes of scrap.
Makes adjustments to and lubricates equipment as necessary; reports any unusual conditions to supervisor. Changes saw blades and cutting solution as required. Performs maintenance checks on forklift truck.
Assists Cast House team with loading and unloading carts that are used to move cast logs through homogenizer furnace; may operate furnace as prescribed in operating instructions.
Observes safety rules and practices; reports any unsafe acts or conditions to supervisor.
Casting Operator
Loads furnace with scrap using forklift or bobcat. Prepares and adds alloying and fluxing materials. Operates controls to regulate the casting of aluminum logs according to standard operating procedures. Performs de-gassing, fluxing, skimming, and stirring operations as necessary. Checks cast book for sample data; tests and/or samples molten metal and takes corrective actions as required. Records production and other operating data.
Uses crane to hook up aluminum logs and remove them from casting pit. Properly identifies and marks cooled logs.
Performs periodic maintenance of the furnace as necessary, including cleaning, scraping, lubricating, adjusting, and other required functions. Reports any unusual mechanical or operating conditions to supervisor.
Unloads and segregates incoming scrap as needed. Assists in identification and disposal of unwanted scrap.
Cleans metallics from casting pit. Assists in making mold changes.
Loading and unloading homogenizer furnace carts, or operating homogenizer as prescribed in operating instructions.
 
Benefits: We offer a competitive salary and benefit package including:
<ul>
<li>401(K) savings plan</li>
<li>Medical, Prescription, Dental, Vision</li>
<li>Life Insurance, STD/LTD</li>
<li>Vacation and holidays</li>
</ul>
Qualifications:
<ul>
<li>Entry level - no experience required</li>
<li>Experience in roles such as laborer, landscaping, machine operator is a plus but not required</li>
<li>Must be able to lift 40lbs</li>
<li>Must be able to stand and move around in a high temperature work environment</li>
<li>A flexible schedule is a must. Weekends are required.</li>
</ul>
Must be available 5:00am - 2:00pm, 8:30pm - 5:00am and weekends are required. A flexible schedule is a must. We offer a competitive salary and benefit package including: Medical, Prescription, Dental, Vision, STD/LTD, Life Insurance &amp; 401(K) savings plan, vacation and holidays.
Equal Opportunity Employer Committed to Maintaining a Drug Free Workplace
Requirements:

Saw/Casting Operator

<h3>Job Description</h3>
Job DescriptionDescription:
Job Purpose
 
The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards.
 
Duties and Responsibilities
 
 
<ol>
<li>Preparation of the QC Labeling areas as specifically described in SOPs.</li>
<li>Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements.</li>
<li>Combines components for final products.</li>
<li>Applies labels to final product and adds package inserts, boxes, etc.</li>
<li>Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature).</li>
<li>Performs disposition of nonconforming products as directed.</li>
<li>Coordinates and stages products for sterilization.</li>
<li>Monitors freezers and responds to alarms.</li>
<li>Supports nonconformance investigations, when applicable.</li>
<li>Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue.</li>
<li>Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues.</li>
<li>Performs other duties as assigned by management.</li>
</ol>
 
Requirements:
Qualifications
 
High School/Minimum of 4 Years of Relevant Experience.
Associate/Minimum of 1 Years of Relevant experience.
Bachelors/Minimum of 0-1 Years of Relevant experience
 
Working Conditions
 
Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. 
 
Physical Requirements
 
Able to stand for extended period. Able to lift 25 lbs. without assistance.
Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds.
Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation.
 
 
 
Direct Reports
No direct reports.
 
Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job any time. 
 
Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training.
 
Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Quality Control Labeling Inspector

<h3>Job Description</h3>
Job DescriptionDescription:
Essential Cabinetry Group is a leader in cabinet manufacturing throughout the U.S., delivering high-quality, customizable cabinetry solutions that blend innovative design with exceptional craftsmanship. Guided by our core C.A.R.E. values—Customer Focus, Accountability, Respect, and Excellence—we are committed to exceeding customer expectations and enhancing the heart of every home we serve. We offer a comprehensive benefits package designed to support our employees' health, well-being, and professional growth. Our benefits include medical, dental, vision, and life insurance, a 401(k) retirement plan with company match, and so much more! We are currently seeking a highly motivated and qualified candidate to fill the role of Quality Inspector. This full-time, 1st Shift position is based in Rockledge, FL, and offers an exciting opportunity to join our team and contribute to a culture built on quality, integrity, and teamwork.
 
The Quality Inspector ensures the quality of the product leaving the Finish Department. This is accomplished by examining materials, following the standards and methods for inspection, rework and remake. 
 
Responsibilities
<ul>
<li>Support the CARE values of the organization. </li>
<li>Commit to producing a quality product for our customers. </li>
<li>Inspect product for defects, specification deviations and monitors the production and flow of these products. </li>
<li>Maintain and Document inspection results and records. </li>
<li>Segregate non-conforming materials. </li>
<li>Perform touch-ups on products that can be reworked on the spot. </li>
<li>Return Product that is beyond the light touch-up work and confirm repairs pass inspection.</li>
<li>Report product that is beyond repair and needs to be made. </li>
<li>Follow up on product that was remade to make sure it flows through the process and is inspected. </li>
<li>Communicate visual and dimensional quality standards and defects to line operators. </li>
<li>Follow established company/department rules and regulations and maintain quality standard. </li>
<li>Follow all legal regulations to maintain a safe and healthy work environment. </li>
<li>Analyze customer drawings, prints, and specifications for finished product. </li>
<li>Perform other duties as required or directed. </li>
<li>Other duties as assigned. </li>
</ul>
Requirements:
<ul>
<li>Proficient in geometric tolerances. </li>
<li>Understand quality standards and practices. </li>
<li>Strong Analytical and problem-solving skills. </li>
<li>Proficiency in computer technology. </li>
<li>PC skills, knowledge of MS office applications required.</li>
<li>Ability to distinguish colors. </li>
<li>Excellent decision-making abilities. </li>
<li>Dexterity (able to stand, bend, reach and carry product to and from the factory floor. </li>
<li>Bi-lingual (Spanish and English) preferred. </li>
</ul>
Working Relationship
Communication is required across all levels of the organization- executive team, other functional leaders, subordinates and production floor workers. The Quality Inspector works under the immediate supervision of the Department Supervisor.
Physical Requirements
<ul>
<li>Must be able to lift/move in excess of 50 lbs. at a time </li>
<li>Stand, walk, stoop, and perform motions for an extended period</li>
</ul>
PPE
Safety glasses, hearing protection, and safety shoes at all times while in the production floor.
Safety
This position expects to adhere to all safety rules to include the use of all require protective personal equipment (PPE). Specifically, eye and hearing protection must be worn at all times while in the production floor.
Work Environment Organization Structure/Career Progression
The work environment characteristics described below are representative of those an employee encounters while performing the essential functions of this job: 
Non-air-conditioned environments; hazardous materials such paints, stains and solvents; machinery, conveyors, spray-booths and drying racks. 
Equal Opportunity Employer
At Essential Cabinetry Group, we believe in the value of your unique identity, background, and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity, veteran status or any other status protected by the law. Applicants requiring a reasonable accommodation due to a disability at any stage of the employment application process should contact Human Resources.

Quality Inspector - 1st Shift

<h3>Job Description</h3>
Job DescriptionDescription:
The Service Technician (Boat Mechanic) is a skilled and experienced role within our organization, responsible for performing mechanical repair and maintenance on boats and marine equipment. This position plays a crucial role in ensuring the reliability and performance of our watercraft.
 
Responsibilities:
<ul>
<li>Mechanical Repairs: Conduct mechanical repair work on various types of boats and marine equipment, including diagnosing and addressing issues with engines, propulsion systems, electrical components, and accessories.</li>
<li>Diagnostic Assessment: Utilize diagnostic tools and techniques to identify and troubleshoot mechanical problems accurately.</li>
<li>Parts Replacement: Replace and install boat components, including engines, transmissions, steering systems, and other critical mechanical parts.</li>
<li>Routine Maintenance: Perform routine maintenance tasks, such as oil changes, lubrication, filter replacements, and system checks, to ensure the continued operation of watercraft.</li>
<li>Quality Control: Conduct quality checks to ensure all repairs meet or exceed industry standards and safety requirements for boats.</li>
<li>Documentation: Maintain accurate records of all repair work, including parts used, labor hours, and maintenance schedules.</li>
<li>Safety Compliance: Adhere to safety protocols and ensure a safe work environment for boat maintenance.</li>
<li>Customer Interaction: Interact with boat owners, providing updates on repair progress, explaining repair recommendations, and addressing inquiries.</li>
<li>Inventory Management: Maintain an organized inventory of spare parts, tools, and equipment, and order supplies as needed to support boat repair and maintenance.</li>
</ul>
Requirements:
<ul>
<li>High school diploma or equivalent (Technical certification in boat mechanical repair preferred).</li>
<li>Proven experience in boat mechanical repair, with a strong understanding of boat systems and components.</li>
<li>Proficiency in using diagnostic tools and equipment specific to boat maintenance.</li>
<li>Strong mechanical aptitude and the ability to troubleshoot and repair boat mechanical issues.</li>
<li>Effective communication skills and customer service orientation.</li>
<li>Ability to work both independently and collaboratively as part of a team.</li>
<li>Attention to detail and a commitment to delivering quality work.</li>
<li>Knowledge of safety regulations and a commitment to maintaining a safe work environment on boats.</li>
</ul>
 
Benefits:
<ul>
<li>Health, dental, vision, and life insurance</li>
<li>Employee discount</li>
<li>Paid time off</li>
<li>401k plan</li>
</ul>
 
Position Type:
This is a full-time position with variable hours, including weekends and overtime as needed during peak workloads.
 
Affirmative Action (AAP/EEO statement):
NVG provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. 
NVG uses E-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify, including your rights and responsibilities. 
NVG is a drug-free workplace.
 
 
Disclaimer:
This job description is not intended to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.
This description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned; 
This job description is subject to change at any time. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Service Technician

<h3>Job Description</h3>
Job DescriptionDescription:
As a key member of Electronic System Services, Inc. (ESSI), the Building Automation Technician will be responsible for field commissioning of HVAC automation systems. This role ensures the proper operation of HVAC systems by reviewing drawings, confirming sequences of operation, and verifying point-to-point connections in the field. The technician works closely with the project team to deliver a fully functional system to the customer. 
Requirements:
Key Responsibilities:
<ul>
<li>Project Review &amp; Scope Breakdown: Review project specifications, drawings, and documents before beginning work. Break down the scope of work into manageable segments and communicate with the Project Manager for reporting.</li>
<li>Project Coordination: Attend or receive meeting minutes from project team meetings with customers. Provide the Project Manager with updates on site conditions.</li>
<li>As-Built Documentation: Produce project-specific as-built drawings based on initial construction drawings and field modification mark-ups.</li>
<li>Standards Compliance: Cooperate in the establishment and enforcement of engineering and programming standards to ensure consistency across projects.</li>
<li>System Troubleshooting: Troubleshoot and resolve issues in the field related to installed systems to ensure optimal performance.</li>
<li>Quality &amp; Customer Satisfaction: Maintain the highest quality standards and ensure customer satisfaction throughout the commissioning process.</li>
</ul>
Requirements
<ul>
<li> Associate's degree in mechanical engineering, Electrical Engineering, or Computer Science is desired. Would consider trade school or similar program.</li>
<li>Two (2) years’ experience with the production of DDC / BAS systems. If not, we would train the right candidate.</li>
<li>Experience with Siemens, Tridium, and Alerton, or another BAS line preferred.</li>
<li>Understanding of mechanical HVAC equipment preferred.</li>
<li>Understanding of electrical and network wiring preferred.</li>
<li>Understanding of standard BAS components and programming of these components preferred.</li>
<li>Excellent computer skills and intimate familiarity with MS-Office products (Word, Excel, Access). We would like you to have some AutoCAD, Visual Basic, Visio and Alerton/Tridium product experience preferred but it is not required.</li>
<li>Effective communication skills both written and verbal.</li>
<li>You must have a valid driver’s license from the State of Florida</li>
<li>Able to pass background check</li>
</ul>

Building Automation Technician

<h3>Job Description</h3>
Job Description
Adecco is currently assisting a local client recruiting for several Machine Operator/Blending Jobs in Kendall, FL. These are long term job opportunities in which you will operate machines and handle components using prescribed standard operating procedures and cGMP guidelines to manufacture and ensure the product meets the quality requirements. The operator will complete the necessary documentation and records to maintain quality control. Pay rate is $18.00 per hour for 1st shift and $19.80 for 2nd shift. Shift schedules are: 1st Shift 5am-3:30pm, Monday-Thursday or 2nd Shift 3:30pm-2am, Monday to Thursday with flexibility to work overtime as needed. For instant consideration for these Packaging jobs, Apply Now!
 Responsibilities
<ul>
<li>
Operate punching, pouching and cartooning machines
</li>
<li>
Operate blending, coating, and slitting machines.
</li>
<li>
Blend various ingredients for the coating process
</li>
<li>
Perform set-ups and operate the equipment in the prescribed area of responsibility
</li>
<li>
Assure work center operates safely to produce products within established quality standards within the cGMP and SOP guidelines
</li>
<li>
Check and weigh components to ensure compliance
</li>
<li>
Clean production room and equipment
</li>
<li>
Perform duties as trained and assigned
</li>
<li>
Maintain a clean organized work area
</li>
<li>
Ability to follow oral and written instructions
</li>
<li>
Ability to work in a fast paced manufacturing environment
</li>
<li>
Must meet medical requirements for personal protective equipment (PPE) used in manufacturing
</li>
<li>
Ability to work with Controlled Substances and all required procedures
</li>
<li>
Completes assigned training curriculums within assigned time frames before performing any activity associated with the training topic
</li>
<li>
Ensure documentation is completed and meet the prescribed standards
</li>
</ul>
Qualifications
Education / Experience: High school diploma. Candidate must demonstrate mechanical aptitude, ability to speak, read and write in the English language and demonstrate the ability to perform basic mathematical calculations. Must be able to operate production equipment with minimal supervision. Employee must demonstrate the ability of adhering to stringent documentation requirements. Pay rate is $18.00 per hour for 1st shift and $19.80 for 2nd shift. Shift schedules are: 1st Shift 5am-3:30pm, Monday-Thursday or 2nd Shift 3:30pm-2am, Monday to Thursday with flexibility to work overtime as needed. Benefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401k plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Click on Apply Now to be considered for these Machine Operator/Blending jobs in Kendall, FL or any related opportunities with Adecco. Equal Opportunity Employer Minorities/Women/Veterans/Disabled 
 Pay Details: $19.80 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to <a href="https://www.adecco.com/en-us/candidate-privacy" target="_blank">https://www.adecco.com/en-us/candidate-privacy</a> The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: 
<ul>
<li>The California Fair Chance Act</li>
<li>Los Angeles City Fair Chance Ordinance</li>
<li>Los Angeles County Fair Chance Ordinance for Employers</li>
<li>San Francisco Fair Chance Ordinance</li>
</ul>

4,258 Manufacturing Jobs