field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
JOB DESCRIPTION:
<ul>
<li>We have a Controls Engineer position open in Orlando, FL.</li>
<li>This position is responsible for electrical/controls engineering on large scale projects.</li>
<li>Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.</li>
</ul>
RESPONSIBILITIES:
<ul>
<li>Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters</li>
<li>Responsible for system design from blank sheet of paper to create concept of electrical/control/system components based on project requirements
<ul>
<li>Experience doing design via drafting software (AutoCAD preferred)</li>
</ul>
</li>
<li>Provide input, and system modification as needed, for system integration with other project disciplines
<ul>
<li>Able to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout</li>
</ul>
</li>
<li>Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied</li>
<li>Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards</li>
<li>Knowledge of analyzing system design for Hazard analysis development and mitigation</li>
<li>Design and analysis for safety critical parts within a control system</li>
<li>Designing redundant mitigations in system to increase safety and reliability</li>
<li>Designing systems with complex motion and integration from automated systems</li>
<li>Develops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans</li>
<li>Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction / cancellation, power consumption, load flow, short circuit protection, protective relay / circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)</li>
<li>Designs, develops, and implements DCS/PLC control system (logic software) to meet process requirements. As well as the ability to understand and implement client design standards for software system</li>
<li>Understanding of control system components and instrumentation to properly design software interface/control to achieve system functionality</li>
<li>Develops documents detailing control/software configuration and design. Documents include: Theory/Description of operation, Detailed control system design description, Software design plan, Detailed software implementation/description, system implementation/acceptance test plans</li>
<li>Knowledge of design, troubleshooting, and code implementation for the following programming languages: Ladder logic (required), C++ (preferred), visual basic (preferred), and structured text (required)</li>
<li>Ability to perform processor loading calculations, scan time analysis, input/output response timing analysis, control system network delays analysis, and program task/code block priorities/timing management/interface</li>
<li>Can design code that is efficient (not processor resource heavy) while maintaining a minimalist implementation to help facility future modifications and understanding by client post turnover. This includes providing any documentation and/or tools that will assist with program understanding and troubleshooting</li>
<li>Ability to diagnose control system issues during troubleshooting to assist in determining root cause (trending, system analysis, test logic, etc.)</li>
<li>Ability to minimize secondary faults from occurring within logic by programming smart diagnostics that can determine root cause and minimize further effects caused by initial fault</li>
<li>Will assist with initial start-up and debug integrated systems and the development of system documentation</li>
<li>Individual will be working on automation and control system integration projects for clients in industries such as entertainment and manufacturing</li>
<li>Will act as technical lead on projects and may guide lower level engineers, technicians, and contractors</li>
<li>Knowledge of ride system design for attractions involving guests is preferred</li>
<li>Capable of working off shifts as needed during installation/commissioning to support project</li>
</ul>
QUALIFICATIONS:
<ul>
<li>Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters</li>
<li>Education – bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)</li>
<li>Experience – 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, safety engineering, instrumentation, components, and logic programming. Experience with AutoCAD is also desired</li>
<li>Key Competencies – Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.). Experience with ethernet based distributed remote I/O systems</li>
<li>Skills – All employees are required to be proficient in the use of Microsoft Windows and Office environments</li>
<li>Travel – Ability to travel up to 30% worst case (10% is typical with last couple years depending on project)</li>
<li>Physical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling</li>
</ul>
Working Condition Expected on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.

Controls Engineer

<h3>Job Description</h3>
Job Description
Team Members&nbsp; At CAVA, we love what we do, and we try and make every day as fulfilling as the last.&nbsp;Our restaurants need team members to make the magic happen every day.&nbsp;Everyone matters and we’re here to celebrate your growth.&nbsp;&nbsp; &nbsp; We&nbsp;foster a culture built on five core values: &nbsp;
<ul>
<li>Positivity&nbsp;–&nbsp;Every one of us can change someone’s day for the better.   &nbsp;</li>
<li>Transparency&nbsp;–We use transparency to help us make decisions through open dialogue&nbsp;&nbsp;</li>
<li>Humility&nbsp;– We can always find ways to improve.&nbsp;</li>
<li>Fanaticism&nbsp;– We are passionate about the opportunity to turn every guest into a fanatic.&nbsp;</li>
<li>Thoughtfulness&nbsp;–We go above and beyond for our guests, our teams and communities. &nbsp;</li>
</ul>
&nbsp; The Role:&nbsp;&nbsp;&nbsp; Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting guests with genuine passion, to teaching customers about our menu and customizing&nbsp;for&nbsp;their personal preferences, to preparing top quality food in our open kitchens – our team members&nbsp;do it all.&nbsp;&nbsp;
&nbsp; What You’ll Do&nbsp;
<ul>
<li>Enthusiastically educate guests about our menu and assemble orders as requested&nbsp;</li>
<li>Keep the serving line, dining room, and restrooms clean and organized&nbsp;</li>
<li>Follow recipes and procedures to maintain food quality and consistency&nbsp;</li>
<li>Adhere to safety and sanitation procedures&nbsp;</li>
<li>Restock stations and keep them clean and organized&nbsp;</li>
<li>Ensure the overall cleanliness of the restaurant&nbsp;</li>
<li>Deliver a delicious, unique, and memorable experience to each of our guests&nbsp;&nbsp;</li>
<li>Put deliveries away, plus any additional duties assigned&nbsp;&nbsp;</li>
<li>Ability to cross train across the restaurant to ensure rapid growth&nbsp;</li>
<li>May stand for long periods of time and&nbsp;lift up&nbsp;to 50 pounds&nbsp;</li>
<li>Assist with any additional duties assigned&nbsp;</li>
</ul>
Physical Requirements:&nbsp; 
<ul>
<li>Must be able to bend and reach overhead often&nbsp;</li>
<li>Must possess dexterity to handle tongs, pots/pans, and other equipment&nbsp;</li>
<li>Must be comfortable working in temperatures ranging from hot to cold&nbsp;</li>
<li>Must be comfortable working near open flames&nbsp;</li>
<li>May be required to work in tight spaces&nbsp;</li>
<li>Must maintain near constant communication with multiple people&nbsp;</li>
<li>Close vision, distance vision, and peripheral vision is required&nbsp;</li>
<li>Must be able to sit, squat and kneel occasionally&nbsp;</li>
<li>Must be able to work in a constant state of alertness and safe manner&nbsp;</li>
<li>May be required to occasionally work in outdoor weather conditions&nbsp;</li>
</ul>
Benefits at CAVA?&nbsp;&nbsp; We’ve got you covered. Here are just some of the benefits available to CAVA team members:&nbsp;
<ul>
<li>Competitive&nbsp;pay&nbsp;</li>
<li>Health,&nbsp;Dental,&nbsp;Vision,&nbsp;Telemedicine,&nbsp;Pet&nbsp;Insurance&nbsp;plus more!*&nbsp;</li>
<li>401k enrollment with CAVA contribution*&nbsp;&nbsp;</li>
<li>Paid sick leave, parental leave, and community service leave*&nbsp;</li>
<li>FREE CAVA Meal for every shift worked&nbsp;</li>
<li>The opportunity to be on the ground floor of a rapidly growing brand&nbsp; *indicates eligible qualifying positions&nbsp;</li>
</ul>
As an equal opportunity employer,&nbsp;CAVA&nbsp;considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law.&nbsp;
Team Member | Culinary Leader | Kitchen Leader | Shift Leader | Cook | Prep Cook | Grill Cook | Prep Crew | Hourly Manager | Shift Manager | Customer Service | Restaurant | Part Time | Full Time | Crew Member&nbsp;| Host | Cashier | Line Cook | Server&nbsp;&nbsp;

Team Member

<h3>Job Description</h3>
Job Description
Team Members&nbsp; At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. &nbsp; We&nbsp;foster a culture built on five core values: &nbsp;
<ul>
<li>Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others.&nbsp;</li>
<li>Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious.&nbsp;</li>
<li>Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt.&nbsp;</li>
<li>Passion for Positivity: We greet each day with warmth and possibility.&nbsp;</li>
<li>Collective Ambition: We have high aspirations that are achieved when we work together with a shared purpose.&nbsp;&nbsp;</li>
</ul>
&nbsp; The Role:&nbsp;&nbsp;&nbsp; As a CAVA Team member you are our guests' first experience!&nbsp; You have the opportunity to bring positivity, charm and an exceptional experience to each customer every time they walk through our doors.&nbsp;&nbsp; From greeting guests with genuine passion, to teaching customers about our vibrant food menu options and customizing their meals to their personal preferences, our team members do it all. 
&nbsp; What You’ll Do&nbsp;
<ul>
<li>Enthusiastically educate guests about our menu and assemble orders as requested&nbsp;</li>
<li>Keep the serving line, dining room, and restrooms clean and organized&nbsp;</li>
<li>Follow recipes and procedures to maintain food quality and consistency&nbsp;</li>
<li>Adhere to safety and sanitation procedures&nbsp;</li>
<li>Restock stations and keep them clean and organized&nbsp;</li>
<li>Ensure the overall cleanliness of the restaurant&nbsp;</li>
<li>Deliver a delicious, unique, and memorable experience to each of our guests&nbsp;&nbsp;</li>
<li>Put deliveries away, plus any additional duties assigned&nbsp;&nbsp;</li>
<li>Ability to cross train across the restaurant to ensure rapid growth&nbsp;</li>
<li>May stand for long periods of time and&nbsp;lift up&nbsp;to 50 pounds&nbsp;</li>
<li>Assist with any additional duties assigned&nbsp;</li>
</ul>
Physical Requirements:&nbsp; 
<ul>
<li>Must be able to bend and reach overhead often&nbsp;</li>
<li>Must possess dexterity to handle tongs, pots/pans, and other equipment&nbsp;</li>
<li>Must be comfortable working in temperatures ranging from hot to cold&nbsp;</li>
<li>Must be comfortable working near open flames&nbsp;</li>
<li>May be required to work in tight spaces&nbsp;</li>
<li>Must maintain near constant communication with multiple people&nbsp;</li>
<li>Close vision, distance vision, and peripheral vision is required&nbsp;</li>
<li>Must be able to sit, squat and kneel occasionally&nbsp;</li>
<li>Must be able to work in a constant state of alertness and safe manner&nbsp;</li>
<li>May be required to occasionally work in outdoor weather conditions&nbsp;</li>
</ul>
Benefits at CAVA?&nbsp;&nbsp; We’ve got you covered. Here are just some of the benefits available to CAVA team members:&nbsp;
<ul>
<li>Competitive&nbsp;pay&nbsp;</li>
<li>Health,&nbsp;Dental,&nbsp;Vision,&nbsp;Telemedicine,&nbsp;Pet&nbsp;Insurance&nbsp;plus more!*&nbsp;</li>
<li>401k enrollment with CAVA contribution*&nbsp;&nbsp;</li>
<li>Paid sick leave, parental leave, and community service leave*&nbsp;</li>
<li>FREE CAVA Meal for every shift worked&nbsp;</li>
<li>The opportunity to be on the ground floor of a rapidly growing brand&nbsp; *indicates eligible qualifying positions&nbsp;</li>
</ul>
As an equal opportunity employer,&nbsp;CAVA&nbsp;considers applicants for all positions without regard to race, color, sex, religion, national origin, disability, age, height, weight, marital status, sexual orientation, familial status, genetic information or any other characteristic or protected classes as defined by federal, state, or local law.&nbsp;
Team Member | Culinary Leader | Kitchen Leader | Shift Leader | Cook | Prep Cook | Grill Cook | Prep Crew | Hourly Manager | Shift Manager | Customer Service | Restaurant | Part Time | Full Time | Crew Member&nbsp;| Host | Cashier | Line Cook | Server&nbsp;&nbsp;

<h3>Job Description</h3>
Job Description
Printing Press Helper - Interprint Web Printing
This position involves assisting the lead press operator on a 28 x 40, 5-color sheet-fed printing press. Responsibilities include helping with press setups and changeovers, as well as monitoring the press during production runs. Duties entail heavy lifting, loading paper and ink, washing press blankets, mounting printing plates on the press, and performing maintenance on the equipment as needed. We are looking for individuals who are mechanically inclined and thrive in a collaborative team environment. * The position is full-time, with 40 hours per week, with overtime available. Interprint Web Printing 12350 US Hwy. 19 N. Clearwater, FL 33764 For more information about Interprint Web Printing, please visit: <a href="http://www.InterprintWebPrinting.com" target="_blank">www.InterprintWebPrinting.com</a>
Company DescriptionOur tailored approach, defined by a strong commitment to meticulous manufacturing, has had a positive impact on our customers throughout our 60 years in business. Our clients benefit from exceptional performance standards, thanks to our dedicated team of employees and ownership. 
<h3>Company Description</h3>
Our tailored approach, defined by a strong commitment to meticulous manufacturing, has had a positive impact on our customers throughout our 60 years in business. Our clients benefit from exceptional performance standards, thanks to our dedicated team of employees and ownership.

Printing Press Helper

<h3>Job Description</h3>
Job Description
JOB DESCRIPTION:
<ul>
<li>We have a Senior Mechanical Engineer position open in Orlando, FL.</li>
<li>This position is responsible for mechanical engineering on large scale projects.</li>
<li>Project requirements involving mechanical system design from scratch, analysis/calculations (stress/fatigue/etc.), acceleration forces, load calculations, material stress design, failure and effects analysis, risk assessment, component selection, mechanical system installation/commissioning.</li>
</ul>
RESPONSIBILITIES:
<ul>
<li>Responsible for system design from blank sheet of paper to create concept of mechanical components based on project requirements</li>
<li>Experience doing design via 3D modeling software (SolidWorks preferred)</li>
<li>Provide input, and system modification as needed, for system integration with other project disciplines</li>
<li>Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied.</li>
<li>Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards.</li>
<li>Project technical risk assessment document generation and mitigation implementation</li>
<li>Design and analysis for safety critical parts within a mechanical system.</li>
<li>Designing redundant mitigations in system to increase safety and reliability.</li>
<li>Designing systems with complex motion and integration from automated systems.</li>
<li>Develops documents of system configuration and design. Documents include Description of operation, Detailed mechanical system design description, analysis reports, system implementation/acceptance test plans, system routine maintenance/job plans</li>
<li>Ability to design and troubleshoot pneumatic and hydraulic systems</li>
<li>Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies</li>
<li>Knowledge of ride system design for attractions involving guests is preferred</li>
<li>Capable of working off shifts as needed during installation/commissioning to support project.</li>
</ul>
QUALIFICATIONS:
<ul>
<li>Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.</li>
<li>Education: Bachelors degree in mechanical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to mechanical engineering. Disciplines outside of the mechanical area will not be considered)</li>
<li>Experience:</li>
<li>10+ years of experience in mechanical engineering roles</li>
<li>At least 3+ years of experience in mechanical design from scratch or major modifications (50+% redesign)</li>
<li>Knowledge of techniques involving GD&amp;T for large scale systems or systems with high duty cycle and fatigue requirements</li>
<li>Experience in ASTM standards, attractions industry, and safety engineering is preferred</li>
<li>Key Competencies: Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving.</li>
<li>Skills: All employees are required to be proficient in the use of Microsoft Windows and Office environments.</li>
<li>Travel: Ability to travel up to 30% worst case (10% worst case with last couple years of projects).</li>
<li>Physical Demands: of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling</li>
<li>Working Conditions: Expected on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.</li>
</ul>

Senior Mechanical Engineer

<h3>Job Description</h3>
Pay:&nbsp;$74,779.30 - $81,056.80 per year
Job description:
Overview
We are seeking an Production Manager to join our growing team. In this pivotal role, you will assist in overseeing production operations. Your leadership will be essential in driving performance, enhancing operational efficiency, and fostering a culture of safety and excellence. The ideal candidate will possess a strong leadership background, along with proven supervisory experience in an industrial setting.
Essential Duties:
<ul>
<li>Provides leadership, support and direction in team-oriented environment.&nbsp;</li>
<li>Coordinates production schedule to meet customer needs.&nbsp;</li>
<li>Ensures OSHA and other environmental compliances.</li>
<li>Ability to balance and achieve positive results in the areas of safety, quality, productivity, cost and employee relations.&nbsp;</li>
<li>Monitor and resolve inventory issues.&nbsp;</li>
<li>Conduct thorough audits of safety and SQF related issues and assign corrections.&nbsp;</li>
<li>Analyze performance trends for production areas and make recommendations for improvement.&nbsp;</li>
<li>Develop and implement improvement and quality initiatives.&nbsp;</li>
<li>Determine staffing and production needs for plant operations.&nbsp;</li>
<li>Manage shift performance measures and provide regular progress reports to manager.&nbsp;</li>
<li>Develops and maintains standard operational procedures (SOP’s).&nbsp;</li>
<li>Manage and develop production staff including training and qualifications, performance&nbsp;</li>
<li>Oversee Team Coordinator activities</li>
<li>Administers progressive discipline as needed.</li>
<li>Coordinates the scheduling of all vacation, sick and personal time for all Production and Sanitation associates.</li>
<li>Proficient in ERP/MRP applications. SAP preferred.</li>
<li>Supervise and direct the Sanitation team on daily tasks.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
</ul>
Requirements:
<ul>
<li>BA/BS preferred</li>
<li>Minimum of 3 years’ experience in a food manufacturing environment, managing 80-100 direct reports</li>
<li>Ability to work well under pressure and meet deadlines.</li>
<li>Required to work a flexible schedule, overtime when necessary.</li>
<li>Experience with safety and environmental health regulations.</li>
<li>Proficiency in MS office programs.</li>
<li>Knowledge of GMP/SQF requirements.</li>
<li>Self-starter and a team player that will thrive in an entrepreneurial environment</li>
<li>Must possess the ability to communicate effectively both internally and externally</li>
</ul>
 
Benefits:
<ul>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
<li>Vision insurance</li>
</ul>
Work Location: In person

Production Manager

<h3>Job Description</h3>
Job Description
At Loews Hotels at Universal Orlando, our team members get to make a difference and have fun every day. Our world-class team brings to life the incredible, award-winning hotels located at Universal Orlando Resort.
Named one of Central Florida's Top Workplaces and one of America's Best-in-State Employers by Forbes, we are committed to our ”power of we” culture.
Are you looking for a place where you can bring your authentic self to work every day and be able to connect, engage and delight?
<ul>
<li>
We offer excellent benefits and perks including one free meal per shift and free theme park access.
</li>
<li>
We have a dynamic culture that makes every day interesting, challenging, fulfilling and fun.
</li>
<li>
We embrace diversity at our core and offer the opportunity for all team members to reach their potential.
</li>
<li>
We invest in training and development opportunities for all team members.
</li>
<li>
We promote social responsibility by being a good neighbor in the community.
</li>
<li>
We care for you, just as we care for others.
</li>
</ul>
About Cabana Bay Laundry
Join the team at our state-of-the-art laundry and warehouse facility in Apopka, Florida.
Preferred Qualifications:
<ul>
<li>Previous experience with Chicago, Milnor, and Jensen laundry equipment preferred.</li>
<li>Basic English language communication skills in reading/writing and speaking in order to complete logs, read blueprints and mechanical drawings, communicate with co-workers and fully comprehend job assignments safely.</li>
<li>Basic trade mathematical skills.</li>
<li>Strong mechanical background with minimal 2-3 years' hands on experience in maintenance related activity.</li>
<li>Ability to bend, stoop and lift up to 75 lbs. repetitively.</li>
<li>Requires full availability including days, nights, weekends, and holidays.</li>
</ul>
Responsibilities: 
<ul>
<li>Performs technical work in the maintenance, repair, replacement, and installation of laundry equipment, commercial washers, dryers, conveyors, ironers, folders, boilers and steam press.</li>
<li>Good knowledge of electrical systems, computers control systems and components, pneumatic and hydraulic controls and systems boiler and steam distribution and return, air conditioning and the maintenance and repair of all.</li>
</ul>
<ul>
<li>Good knowledge of OSHA safety procedures and regulations.</li>
<li>Good knowledge of utility and sewer systems associated with Laundry operations.</li>
<li>Prepares records and reports describing procedures, action taken, and recommended solutions.</li>
<li>Other duties as assigned.</li>
</ul>
Loews Hotels &amp; Co is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances.

Engineering Specialist - Commercial Laundry Mechanic

<h3>Job Description</h3>
Job DescriptionA day in the life
You clock in, put safety first, and head straight to the drawings. Your day starts by reviewing blueprints, engineering schematics, and specifications to understand materials, weld types, and positions. You take precise measurements, plan the layout, and choose the best process—often TIG or MMA—based on the job at hand.
With the plan in place, you prep the work. You stage components, bevel and clean edges with an angle grinder, and align parts using squares, rulers, and calipers. Fixtures and clamps hold everything true. Then you weld—manual or semi-automatic—in vertical, horizontal, and overhead positions, producing clean, structurally sound beads. When machines or components need repair, you gap-fill and restore function with careful technique.
Throughout the day, you examine welds and joints to verify quality, looking for flaws and ensuring they meet internal standards and specifications. You finish by maintaining welding equipment so it’s ready and safe for the next assignment.
What you’ll do
<ul>
<li>Read and interpret blueprints, drawings, and specifications to determine job requirements.</li>
<li>Measure accurately to plan layouts and procedures.</li>
<li>Select appropriate welding equipment and techniques for each project.</li>
<li>Prepare and set up components using angle grinders and other fabrication tools.</li>
<li>Align and clamp workpieces using calipers, rulers, and other measuring devices.</li>
<li>Weld components using manual or semi-automatic processes in vertical, horizontal, and overhead positions.</li>
<li>Repair machinery and components through welding and gap filling.</li>
<li>Inspect welded surfaces and assemblies for defects and compliance with quality standards.</li>
<li>Keep welding equipment in safe, reliable working condition.</li>
</ul>
How you’ll work
This role has no direct reports. You operate independently day-to-day while collaborating closely with teammates to meet production schedules and quality goals. You’re comfortable working with potentially dangerous equipment and strictly follow safety protocols. A steady hand, strong attention to detail, and a solid understanding of different metals and their properties are essential.
Minimum qualifications
<ul>
<li>Minimum 5 years of professional welding experience in a manufacturing environment.</li>
<li>Proficiency with multiple welding techniques and equipment (e.g., TIG, MMA).</li>
<li>Skilled with electrical and hand tools, including squares and calipers.</li>
<li>Ability to read and interpret technical documents and engineering drawings.</li>
<li>Excellent attention to detail and strong hand–eye coordination.</li>
<li>Proficient in English (oral and written).</li>
<li>Completion of a recognized welding apprenticeship program.</li>
</ul>
Preferred qualifications
<ul>
<li>CWI or CRAWL certification.</li>
<li>AWS Professional Welding Certification.</li>
<li>Experience with both MIG and TIG.</li>
</ul>
Physical demands
<ul>
<li>Able to lift up to 50 lbs.</li>
<li>Capable of standing for extended periods and performing overhead welding tasks in a physically demanding environment.</li>
</ul>

Industrial Fabrication Welder

<h3>Job Description</h3>
Job Description
Looking to build your career and design your future? You have come to the right place. 
Summary:
The CAD Programmer will be responsible for creating accurate and detailed technical drawings and creating CNC programs for cutting, drilling and edging counter tops using CAD software.
Essential Functions:
<ul>
<li>Ensure all equipment is maintained and serviced according to established protocols</li>
<li>Maintain appropriate inventory levels and ensure that materials and equipment are accounted for to avoid loss, theft, waste or damage</li>
<li>Responsible for the preparation, organization and maintenance of job files, records, OSHA records</li>
<li>Ensure jobs stay within projected bids to avoid overages in cost to the company.</li>
<li>Coordinate with production manager</li>
<li>Ensure all incoming materials are off loaded properly according to Company safety policies and procedures</li>
<li>Ensure subordinates perform on going quality control inspections to detect fabrication errors/problems</li>
<li>All other job duties as assigned</li>
</ul>
Skills and Qualifications:
<ul>
<li>High school diploma or general education degree (GED);</li>
<li>Technical Degree preferred</li>
<li>Minimum of two years related experience and/or training; or equivalent combination of education and experience</li>
<li>Working knowledge of fabrication techniques, internet, inventory, project management, spreadsheet, and word process software</li>
<li>CAD/CAM experience</li>
<li>Bilingual experience preferred, but not required (English/Spanish)</li>
<li>Must have a thorough knowledge of all available products used by the Company as it relates to product installation</li>
<li>Interpersonal skills to develop and maintain professional working relationships with builders, vendors, subordinates, and co-workers</li>
<li>Communicate effectively with customers, co-workers, and supervisors in a professional and courteous manner</li>
<li>Proactively identify, analyze, address, and resolve problem areas, conflicts, and issues</li>
<li>Displays willingness to make decisions</li>
<li>Exhibits sound and accurate judgment, supports, and explains reasoning for decisions, includes appropriate people in decision-making process, and makes timely decisions</li>
<li>Strong organizational skills to ensure adequate tracking systems are utilized to maintain and track all required information associated with the ordering and production process</li>
<li>Working knowledge of internet, inventory, project management, spreadsheet and word process software and order processing systems.</li>
</ul>
Work Environment and Physical Requirements:
<ul>
<li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li>
<li>Fumes, odors or gases</li>
<li>Dust and airborne particles of any kind, such as textile dust, wood, and silica.</li>
<li>Hazardous conditions where there is the potential for bodily injury such as closeness to moving mechanical parts</li>
<li>Must be able to wear personnel protective equipment for tasks requiring them.</li>
</ul>
If you like working with a growing close knit team and helping home owners design the home of their dreams, come build your career with us!
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, individual with disabilities, veteran status, gender identity or national origin.
Company DescriptionWe are the leading national installer for select high-value and stylistically important interior finishes, such as flooring, cabinets and countertops, to our homebuilder customers, as well as multi-family, commercial and repair &amp; remodel customers. 
<h3>Company Description</h3>
We are the leading national installer for select high-value and stylistically important interior finishes, such as flooring, cabinets and countertops, to our homebuilder customers, as well as multi-family, commercial and repair &amp; remodel customers.

CAD/CAM Programmer (Countertop Fabrication)

<h3>Job Description</h3>
Job Description
Revolution Fence Company is expanding our fabrication capabilities and seeking a highly motivated Fabrication &amp; Operations Lead to help design, implement, and manage our fabrication shop processes. This role blends hands-on welding/fabrication with building scalable systems, procedures, and team capability to deliver custom gate fabrication, railing, dumpster enclosures, and other small-scale metalwork. You will be part of a growth-focused culture that values teamwork, communication, and continuous improvement. If you’re energized by building something from the ground up and want to grow with a company, this is the role for you.
Key Responsibilities:
<ul>
<li>Design, implement, and manage the fabrication division’s end-to-end process: from intake and estimating to production planning, quality control, and delivery.</li>
<li>Develop and document shop procedures (work orders, cut lists, nesting, welding procedures, QA/QC checks, SOPs, safety programs).</li>
<li>Create project timelines, material planning, and budgeting for custom fabrication jobs.</li>
<li>Lead hands-on welding/fabrication for aluminum, galvanized steel, and related materials as needed (MIG/TIG/STICK).</li>
<li>Read and interpret blueprints, schematics, and technical drawings; translate customer requirements into actionable fabrication plans.</li>
<li>Maintain equipment maintenance schedules, tooling inventory, and safety compliance.</li>
<li>Collaborate with project managers, contractors, and customers to ensure on-time, on-budget delivery.</li>
<li>Foster a safe, collaborative, and respectful work environment; uphold OSHA and industry safety standards.</li>
<li>Embrace and contribute to our culture of teamwork, accountability, and growth.</li>
<li>Required Qualifications </li>
</ul>
Required Qualifications
<ul>
<li>3+ years hands-on welding/fabrication experience; 1+ year in a supervisory or process-improvement role (fabrication shop, metal fabrication, or equivalent).</li>
<li>Strong welding skills (MIG, TIG, and/or stick) with the ability to mentor others.</li>
<li>Excellent leadership, communication, and collaboration skills.</li>
<li>Ability to manage multiple projects, meet deadlines, and adapt to changing priorities.</li>
<li>Commitment to safety, quality, and customer satisfaction.</li>
<li>Motivated by growth, with a desire to build and scale a fabrication capability within a family-owned business.</li>
<li>
Bilingual abilities are optional but a plus
</li>
</ul>
Benefits:
<ul>
<li>Paid Holidays</li>
<li>Paid Time Off</li>
<li>Supportive and team-oriented work environment</li>
<li>Competitive compensation with clear growth potential based on performance and company growth </li>
</ul>
If you are a skilled welder looking for a company to grow with, Revolution Fence Company is the place for you. Join our team and help us revolutionize the fencing industry one project at a time.
 #hc123172

9,301 Manufacturing Jobs